Antique Hammer Epoxy Polyester Powder Coating 120 - 140mm Liquidity

1. General introduction:

Powder coatings are mixed with a certain proportion of the resin, fillers, curing agents and other additives, then prepared by hot extrusion ,crushed and sieved.The products are stable at room temperature storage, then baking heat melted and solidified to form a smooth and bright permanent coating to achieve the purpose of decoration and corrosion.

3. Product series:

The products include high light ( above 86%),glazed (76%-85%),matte(20%-50%),low light (below 20%). We also offer a variety of shiny products according to the needs of users.

4. Powder physical properties:

Proportion : 1.2-1.8 (depending on the color and gloss ) .

Particle size distribution: 100% less than 125 microns (more than 85%
between 60 to 90).

Liquidity(180°C):22~35mm.

Curing conditions:200°C,10 minutes.

5. Average coverage:

8-10m³/kg, the membrane is 60μm
(calculate by 100% utilization rate of powder coating).

6. Packing:

Carton packaging, lined with double polyethylene bag, net weight 20 kg.

7. Storage requirements:

Store below 30 °C, ventilated, dry, clean room, not near the fire, heat, direct sunlight, open dumps is prohibited.Under this condition, the powder can be stable for 12 months, more than the storage period may be re-examined, such as the results meet the requirements, can still be used.

8. Health and safety:

This product is non-toxic. In the course of inhalation of dust should be avoided. The operators should wear appropriate dust mask and glasses.

9. Coating performance

10. Why choose our products?

1). We have our own factory. The good quality and the competitive is the advantage of our company.
2). The material we choose is always good and products always come out with high quality.
3). A trial order or sample orders are welcomed.
4). Our products are exported to Europe, America, Southeast Asia, and other countries and regions in the world.
5). We will do our best to service you all the time if you have the further question.

Greentech (Tianjin) Anti-corrosion Engineering Tech Co.,Ltd. was founded in 2011, is a large-scale research and development of powder coating and production-oriented enterprises. The mainly product is thermosetting powder coating. The company registered capital is 12 million RMB, currently has 120 employees, the company office located in Huayuan industry high-tech park, the factory is located in Xiqing district Zhangjiawo Industrial Park, the company owns 26 production line, the annual production capacity of 24,000 tons.
The company mainly produces epoxy powder coating, epoxy polyester powder coating, polyester powder coating, have more than 1,000 kinds of powder coating. Since the founding of the company has always adhered to the field of powder coatings for research and development direction, has been successfully developed and put into production "special radiator powder", "high-end bicycles (electric vehicles) special powder", "pipe special powder", "locomotive parts Surface spray powder "," valve powder "and many other special products, The sales volume are up to top ten for several years.

The company always provide customers with stable and reliable quality products, owns the ISO9001 quality, 14000 environmental management system certification. International advanced quality testing equipment, and fine processing technology formed a set of characteristics of the quality control process, good technical support and after-sales service system. "Quality is stable, consistent" has become the industry consensus on the quality of the company's products.